What is a stormwater fee credit manual, and how do billing staff use one

If you've ever had a property owner show up at a counter with a drainage report from 2015 and ask why their bill doesn't reflect it, you already know why a credit manual exists. It's the document that tells billing staff, appraisers, and the property owner's engineer exactly what counts as credit-worthy, how much it's worth, and what paperwork has to back it up before anyone adjusts a line on the fee roll.
A stormwater fee credit manual is the technical reference that sits underneath your credit program. The ordinance gives you legal authority to charge the fee and offer credits in the first place. The manual is the detailed, often 30-to-80-page document that lays out credit categories, calculation methods, documentation thresholds, and renewal terms, so that two different reviewers looking at the same site plan reach the same number.
What's in one
Most manuals utilities use day to day cover the same ground, even if the formatting differs:
- Eligible BMP types - detention ponds, bioretention cells, permeable pavement, green roofs, rain gardens, whatever your program recognizes.
- Credit calculation methodology - a formula or lookup table tying a BMP's design capacity (or its percent reduction in impervious runoff) to a credit percentage against the base fee.
- Required documentation - as-built drawings, a maintenance agreement, an engineer's certification, inspection photos. Whatever the appeals board will want to see if a decision gets challenged.
- Credit caps - the maximum percentage any one parcel can shave off its bill, which protects the fee roll from a handful of large commercial sites essentially opting out.
- Renewal and inspection cycle - credits aren't usually permanent. Most manuals set a 2-to-5-year recertification window tied to a site visit or updated engineering report.
- Appeal and revocation procedure - what happens when a BMP fails inspection, or an owner disputes a denial.
A well-built manual reads less like policy prose and more like a reviewer's checklist, because that's what it's for.
Credit manual vs. credit policy: not the same document
This is where a lot of confusion comes from, including from council members who've seen one slide deck and assume it covers everything. The credit policy is the short statement of intent: the utility will offer credits for on-site stormwater management, credits top out at X%, here's who can apply. It's usually a page or two, sometimes embedded right in the ordinance.
The credit manual is everything underneath that policy: the math, the forms, the inspection checklist, the documentation standard. You can change a formula in the manual without touching the policy or going back to council. That separation is deliberate. It lets billing staff and engineering update calculation tables as BMP standards evolve, without reopening a legislative process every time.
How billing staff use it
In day-to-day operation, the manual is the thing a billing clerk or GIS tech reaches for when a credit application lands on their desk. They're checking: does this BMP type qualify, is the documentation complete, does the submitted impervious area match what's on the parcel layer, and does the calculated credit fall inside the cap. None of that works if the baseline parcel data the credit gets applied against is wrong or years out of date. A credit calculated against a stale impervious footprint, maybe a driveway that's since been expanded, or a rooftop addition nobody recorded, produces a wrong bill even when the credit math itself is correct.
That's the part of the system that tends to get the least attention, because digitizing every parcel off aerial photos is slow, and most utilities only do it ahead of a rate study every five or ten years. In between, additions, pool decks, and parking lot expansions change impervious area on the ground and the fee roll doesn't catch up. If you're rebuilding or refreshing a credit manual, it's worth pairing that work with an impervious layer that gets updated on a real cadence rather than once a decade, so the number a credit percentage gets applied to is still the number on the ground. That's the gap Stormwater Fee is built to close: a parcel-level impervious area layer from high-resolution imagery, refreshed on a biennial cycle, handed to you in a format your billing system can actually use.
A credit manual only does its job if the baseline it's measuring against is current. If yours needs that fix, take a look at what Stormwater Fee delivers between rate studies.